2. Remove oll filler cap.
3. Undo the oil drain plug (a/f 19) on the oil container. Make sure to counter with a wrench (a/f 27)
when doing this. Unscrew the loosened plug and drain the oil.
CAUTION
Danger of scalding from draining oil!
•
Take suitable protective measures to avoid scalding by hot oil
4. Equip oil drain plug with new sealing ring and tighten. Make sure to counter with a wrench when
tightening. Tightening torque 60 Nm (44 ftlb.).
5. Undo oil drain plug on the crankcase. Unscrew the oil drain plug (a/f 15) and drain the oil. Then equip the
plug with a new sealing ring and tighten. Tightening torque 70 Nm (52 ftlb.).
CAUTION
Danger of scalding from draining oil!
•
Take suitable protective measures to avoid scalding by hot oil
Removal
einordnung
507