30 01 07 Bleeding clutch operation
Disposal of Pentosin
The actuating hydraulic system is bled via pumps on the pedal.
Note
•
On right−hand drive vehicles, the supply tank is located in the area of the brake fluid reservoir/control
module for automatic headlight beam adjustment (ALWR)!
1. Fill supply tank.
2. Open bleeder valve on the servo unit −(arrow)− .
Note
•
Make sure that the reservoir is not sucked dry. Top up during the procedure if necessary!
3. Pump with the clutch pedal until Pentosin emerges without air bubbles at the bleeder valve of the servo
unit (use collecting bottle).
Note
30 01 07 Bleeding clutch operation
666