43 19 Removing And Installing The Charge Air Cooler; Removing The Charge Air Cooler - Porsche 996 TT Repair Manual

21 43 19 Removing and installing the charge air
cooler

Removing the charge air cooler.

Installing the charge air cooler
top of page
Removing the charge air cooler.
Preliminary work: The accesories rear end bumper (Serv. No.: 635519) and the wheel housing liner
(Serv.:536919) must be removed.
1. Disconnect the connecting hose between the air cleaner and the charge air cooler. To do so, lever out the
retaining clip on the top of the charge air cooler and pull the hose out.
2. Pull the lower connecting hose off the charge air cooler. To do so, lever the retaining clip out and pull the
hose downwards.
3. Undo the front fastening. Unscrew the fastening nut and the two fastening
screws.
4. Undo the bolts on the heat shield. Undo the two sheetmetal nuts on the lower end of the heat shield.
Then press the heat shield out of the studs.
5. Undo the rear fastening. Unscrew the fastening nut and the fastening
screw.

21 43 19 Removing and installing the charge air cooler

583