Porsche 996 TT Repair Manual page 519

• The oil guide housing of cylinder 1 − 3 and 4 − 6 differ in height.
12. Remove oil guide housing. Heat the three hexagon socket head bolts using a hot−air gun,
unscrew and remove the housing. The fastening screws are microencapsulated and therefore
must be replaced.
13. Remove camshaft bearing cap. To do so, uniformly unscrew the hexagon−head bolts of the relevant
bearing covers from the inside. Remove the bearing covers in the specified order.
14. Remove camshaft bearing covers. Lift the bearing covers up and off. The bearing covers must not be
confused.
Removing the camshaft housing
einordnung
456