14. Remove camshaft bearing covers. Lift the bearing covers up and off. The bearing covers must not be
confused.
15. Remove thrust bearing cover. Unscrew the hexagon−head bolts and remove the thrust bearing
cover up and off.
16. Lift camshafts up and out.
top of page
Installing camshafts
Note
•
The oil guide housing of cylinder banks 1 − 3 and 4 − 6 differ in height.
Comparative view of oil guide housing of cylinder banks 1 −3 and 4 − 6
The following assembly is only required if the oil guide housing has been disconnected from the camshaft
when removing!
Installing camshafts
einordnung
481