Assembling The Crankcase - Porsche 996 TT Repair Manual

Removing tension rod bolts.
9. Crankcase half (cylinder bank 1 − 3).
10. Remove O−rings and tension rod bolts of thrust blocks 2, 3, 4 and 5.
top of page

Assembling the crankcase.

1. Fasten engine holder P201 to the right crankcase half (cylinder bank 4 − 6).
2. Check the matching number of the crankcase halves. The number is located on the top of the head lug.
Note
• There are tolerance groups 0 and 1
3. Allocation of the crankshaft gearwheel and the intermediate shaft to the crankcase. The tolerance group
number is imprinted on the crankcase −arrow− and must match the number on the intermediate shaft
gearwheel and the crankshaft gearwheel.
Assembling the crankcase.
einordnung
399