Installing Bypass Flap Control Box On The Turbocharger - Porsche 996 TT Repair Manual

4. Undo and unscrew the two holder screws of the control box.
5. Remove control box.
top of page

Installing bypass flap control box on the turbocharger

1. Push the push rod of the control box into the bypass flap
release.
2. Secure the control box by screwing in and tightening the two holder screws.
Tightening torque 10 Nm (7.5 ftlb.)
3. Screw the nut on the push
rod.
4. Adjust the control box => Checking and adjusting the bypass flap control boxes on the turbocharger.
5. Push the vacuum hose on to the control box.
Removing bypass flap control box on the turbocharger
einordnung
589