Porsche 996 TT Repair Manual page 581

2. Tightening inlet line
a. Fit a new O−ring on the inlet line between the oil container and engine and insert the line.
b. Tighten the two hexagon socket head
bolts.
Tightening torque: 9.7 Nm (7 ftlb.)
3. Tightening positive crankcase
ventilation and oil container
fastening
c. Push on the positive crankcase ventilation hose again and tighten the −hose clamp−
.
d. Position and tighten the oil container −fastening screw−
.
Tightening torque: 23 Nm (17 ftlb.)
4. Pushing on oil level sender plug and tightening the oil line
e. Push on the oil level sender connecting cable
again.
f. Tighten the oil return line of the cylinder head. Make sure to counter with a wrench at the oil container
when doing this.
Installing oil container
einordnung
518