3. Slide the washer −7− and stop plate −6− (No. 6 in correct position) as far as they will go onto the
piston rod.
4. Place the spring strut mount (assembly of spring strut mount / intermediate part / spring plate) onto
the piston rod so that the end of the coil spring lies against the stop of the spring plate.
5. Place stop plate in the correct position on the spring strut mount.
6. Screw new fastening nut onto the piston rod until approx. 1 to 2 threads are visible above the
fastening nut.
Note
•
The mounts for the right and left sides are identical parts!
Assembly
einordnung
351