Placing Collapsible Spare Wheel In To The Vehicle − Turbo With Pccb - Porsche 996 TT Repair Manual

top of page
Placing collapsible spare wheel in to the vehicle − Turbo with
PCCB
1. After using the collapsible spare wheel, release the air by unscrewing the valve
case.
Note
It takes several hours for the tyre to resume its original form! It can only be stowed in the spare wheel
•
recess in the luggage compartment after it has resumed its initial form!
2. After releasing the air, fasten the tension straps lying opposite. To this purpose, pull the straps through the
rim and place around the tyre. Position the straps in such a way that the strap fastenings are on the inner
side of the rim.
3. Close the strap fastenings −arrow− . Retighten straps when necessary.
4. Stow the collapsible spare wheel in the spare wheel recess so that the tension straps lie to the front and to
the rear.
Note
The collapsible spare wheel may only be repaired by the manufacturer.
•
• In the case of vehicles with PCCB, the spare wheel cannot be stowed in the spare wheel recess
without securing it with the tension straps!
The loops on the tension straps simplify the removal of the collapsible spare wheel or its placement in
•
the vehicle.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Mounting collapsible spare wheel − Turbo with PCCB
einordnung
354