Porsche 996 TT Repair Manual page 289

k. Attach cutting thread −B− firmly with the clamping screw −3−
.
7. Installing spooling device and deflection rollers on the glass
l. Position spooling device −A3− diagonally in the centre of
the glass.
m. Press spooling device −A3− with the fastening intakes firmly against the glass.
n. Fix fastening intake onto the glass by moving the actuating
lever.
8. Separating glass as far as P1
o. Separate glass by spooling the cutting thread on the spooling device as far as point −P1− .
9. Repositioning
spooling device
p. Release spooling
device.
q. Release the lower fastening intake on the spooling
device.
r. Pull cutting thread through onto the other side of the fastening
intake.
s. Fix fastening intake onto the glass by moving the actuating
lever.
Removing glass with cutting wire separator
einordnung
226