Porsche 996 TT Repair Manual page 403

No. Designation
1 Fastening nut
M 14 x 1
2 Stop plate
3 Spring strut mount 1
4 Back−up ring
4A Mount
Tools
einordnung
Qty. Removal
1 Before loosening the fastening nut,
tension coil spring with the spring
clamp. Counter at the piston rod
when loosening the nut.
1
1
1 Remove the mount from back−up
ring No. 4 only when replacing the
mount (Lever out mount with a
small screwdriver).
Installation
Use new fastening nut. Tighten
to 80 Nm (59 ftlb.).
Mount in correct position (No. 2
and No. 7 are identical parts).
The "RI" or "LE" code for the
right or left side respectively is
stamped on the top of the spring
strut.
Make sure it is seated properly
in the back−up ring No 4.
340