Installation - Porsche 996 TT Repair Manual

6. Undo the lower right−hand fastening point of the oil tank.
7. Loosen and remove two hexagon−head bolts (M6 x 16) on the flexible flange of the oil tank.
8. Carefully press the flexible flange off the check valve with a plastic spatula; a second person should
press the oil tank to the right at the same time. Insert a suitable piece of wood between the crankcase
and oil container.
DANGER
Risk of damage!
Do not twist the flange.
•
9. Undo the fastening screw (M8 x 30) and pull the check valve off the crankcase. Push the oil container
aside at the same time.
top of page

Installation

1. Coat the new sealing rings of the check valve with Vaseline and fit them. Push the oil container aside
at the same time.
2. Equip the flexible flange with a new sealing ring, put the flange on the check valve without using
excessive force and fasten it in place.
3. Screw down the oil tank fastening point on the lower right side.
Installation
einordnung
508