90 19 Removing And Installing Pressure Sensor; Removal; Installation - Porsche 996 TT Repair Manual

21 90 19 Removing and installing pressure sensor

Removal

Installation

top of page
Removal
1. Undo hexagon−head bolt and pull pressure sensor out of the pressure pipe.
2. Press the button on the plug and pull off the plug at the same
time.
top of page
Installation
1. Fasten pressure sensor with a new hexagon−head bolt (M6 x 16) and tighten to 10 Nm (7.5 ftlb).
2. Fit plug. The plug should engage audibly.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
21 90 19 Removing and installing pressure sensor 609