17 04 19 Removing and installing oil pressure sender
Removal
Installation
top of page
Removal
1. Undo fastening screw M6x34 on the air cleaner housing.
2. Undo hose clamp between the air cleaner housing and intake
manifold.
3. Tilt the complete air cleaner housing 90° upward and remove to the rear.
4. Pull off the connecting hoses between the charge air coolers and the pressure pipe. To do this,
unclip the locking clips with a screwdriver. Then return the locking clips to installation position.
Additionally undo a fastening screw on the right−hand pressure pipe side.
17 04 19 Removing and installing oil pressure sender
499