Porsche 996 TT Repair Manual page 661

13. Undo hose clamp between the air cleaner housing and intake manifold.
14. Tilt the complete air cleaner housing 90° upward and then remove from the engine compartment.
15. Pull of the connecting hoses between the charge air coolers and the pressure pipe. Unclip the locking clips
using a screwdriver and pull off the hose. Then clip the locking clips in again.
16. In order to remove the pressure pipe, loosen the hose clamps and hexagon−head bolts. Pull off the
electrical plug.
17. Disconnect oxygen sensor plug on the rear closing panel.
18. Disconnect oxygen sensor plug.
19. Undo the three fastening screws of the belt pulley on the hydraulic system pump by approx. 1/2 turn.
Removal
einordnung
598