Add Integrated Announcements/Tn2501Ap - Avaya CMC1 Installation, Upgrades And Additions

Adding or Removing Hardware
10. Type combined in the Group Type field.
11. Type 5 in the Hold Time (min) field.
12. Type two-way in the Direction field.
13. Type 9600 in the Speed field.
14. Type Full in the Duplex field.
15. Type async in the Synchronization field.
16. Type the port pair assignments in the Analog and Digital fields and
press
Settings for Modem Connected to the Data
Terminal Equipment (DTE)
1. Type add station next and press
2. Type 2500 in the Type field.
3. Type the port assignment in the Port field and press
Add Integrated
Announcements/TN2501AP
Replacing a TN750/B/C circuit pack
If you are replacing a TN750C announcement circuit pack with the new
TN2501AP:
get a list and description of the announcements stored on the TN750C
circuit pack.
re-record the announcements on a computer or at a professional recording
studio as .wav files (CCITT µ-Law or A-Law, 8KHz, 8-bit mono), so that
they are ready to transfer to the new announcement circuit pack after it is
installed and administered. See
!
5-32
Issue 5 October 2002
.
Enter
CAUTION:
Before you remove a TN750A or B circuit pack from its carrier, ensure
that you have backed up the announcements that are stored on it.
Once you remove the circuit pack from the carrier, power is lost along
with the announcements.
.
Enter
Enter
Announcement File Specifications.
.
555-233-118