Avaya CMC1 Installation, Upgrades And Additions page 79

Activate and Administer the System
Set System Maintenance Parameters
!
CAUTION:
To prevent unnecessary trouble tickets, do not enable the system alarms (Alarm
Origination feature) until all installation and administration procedures are completed.
1. Enter change system-parameters maintenance and press
2. Enter the alarm notification and scheduled maintenance information into
each field on Page 1 of the form.
3. Enter the appropriate information on Page 2 of the form.
4. Press
Administer the Attendant Console
If no attendant console is installed, proceed to
1. Enter display system-parameters country-options and press
Verify the system's companding mode for its local stations (usually, A-Law
for Europe and mu-Law for North America and Japan).
2. If necessary, enter change terminal-parameters 603/302B1 to change
the default system-level parameters and audio levels for these terminals.
3. Administer other forms listed under "Attendant Console" in Administrator's
Guide for Avaya MultiVantage Software.
To administer an Avaya SoftConsole, see Administrator's Guide for Avaya
MultiVantage Software.
Save Translations
1. Enter save translation and press
translations onto the translation card and takes about 10 minutes.
2. Remove the original translation card and replace with the backup card.
3. Repeat Step 1 for the backup translation card.
4. Remove the backup card and replace with the original translation card.
5. Label the backup card with the date and time of the backup and store in a
secure place.
555-233-118
when finished.
Enter
NOTE:
For information about changing the default parameters and audio
levels, refer to DEFINITY Application Notes available through the
ITAC (International Technical Assistance Center).
Save Translations.
This copies the current system
Enter.
Issue 5 October 2002
.
Enter
.
Enter
1-65