Avaya CMC1 Installation, Upgrades And Additions page 286

Adding or Removing Hardware
Assign Server and Domain Names. The Windows NT server identifies servers
using a server name plus a domain name that locates the named server in a
particular part of the network. The TN802B IP Interface is shipped with generic
server and domain names. Assign replacement names that are meaningful within
your network.
1. Click on My Computer > Control Panel > Network.
2. Select the Identification tab, then click Change.
3. Type the new server name in the Computer Name field.
4. Type the new domain name in the Domain field and click OK > OK >
Close.
5. When prompted to reboot the computer, select one of the following options:
Assign an IP Address. 1.Click on My Computer > Control Panel > Network.
2. Click the Protocols tab.
3. Select TCP/IP Protocol from the list.
4. Click the Properties option in the Network window.
5-84
Issue 5 October 2002
No if you have not assigned IP addresses then go to
Address''
Yes if you have assigned IP addresses.
''Assign an IP
555-233-118