Avaya CMC1 Installation, Upgrades And Additions page 58

Installing and Cabling the Cabinets
Label the Main Distribution Frame
Figure 1-23
system, cross-connections, information outlets, and cables.
1. Write the floor and building identification on each label as required.
2. Insert the labels into the plastic holders.
3. Snap the holders into the appropriate locations on the MDF.
Figure Notes
1. Floor and building identification
2. Cabinet
3. Carrier
4. Slot
5. Information outlet
Figure 1-23. Label Graphic Symbols and Nomenclature
1. Label the cables as required using the supplied labels. Label code number
220A (Comcode 103970000) contains all required labels.
1-44
Issue 5 October 2002
shows the graphic symbols used on the supplied labels for the
r758422i LJK 050996
6. Site/satellite closet
7. Tie circuit
8. Floor
9. Building
555-233-118