Avaya CMC1 Installation, Upgrades And Additions page 27

Install the System Cabinets
Install Cabinet A — Wall-Mount
Figure 1-4. Left Panel Used as Mounting Template
1. Place the template on the wall ensuring that the top surface is level.
2. Mark two 1/8-in. (0.3 cm) pilot holes in the mounting hole locations.
3. Remove the template from the wall.
4. Drill the two pilot holes.
5. Thread two #12 x 1-in. shoulder screws partially into the holes.
6. Set the cabinet onto the wall and align the slots with the shoulder screws.
See
Tighten the screws securely.
555-233-118
Figure 1-5 on page 1-14. Slide the cabinet to the left to hold it in place.
Issue 5 October 2002
1-13