Upgrade The Software; Install The License File - Avaya CMC1 Installation, Upgrades And Additions

Upgrading R9csi/R10csi to Avaya MultiVantage
Software on an Avaya DEFINITY Server CSI
2. If administered recorded announcements are listed, type save
announcements UUCSS and press
The time necessary for this depends upon the length and number of the
announcements on the circuit pack.

Upgrade the software

1. Write down the release string EXACTLY as it appears on the orange card.
2. Insert the media in the processor circuit pack.
3. Type upgrade software <release string> (case sensitive) and press
This process takes about 10-12 minutes.
4. When the system prompts (beeps), insert the original translation (white)
card into the processor circuit pack.
5. When the upgrade is complete, log off the system and log in again as craft.

Install the License File

Pre-installation
1. Type save translation and press
After the translations have been copied (about 10 minutes), the system
returns an error code, which must be a zero; otherwise, the translations are
not copied.
2. Type reset system 3 and press
Wait until the system has completely reset before continuing.
3. If the system has IP endpoints registered, unplug the Ethernet cable from
the TN799 (C-LAN) circuit pack.
4-16
Issue 5 October 2002
NOTE:
For some DEFINITY ECS software versions, type save
announcements from UUCSS. Type help and press
complete command syntax.
NOTE:
Note: The entire string is 16 characters, including 4 periods.
NOTE:
You have 2 minutes to replace the Avaya MultiVantage Software card
with the translation card. If you miss this window, the system comes
up without translations. Correct this by inserting the original
translation card into the processor circuit pack and use the reset
system 3 command at the SAT.
. For example, 01D03.
RETURN
.
Enter
.
Enter
for the
RETURN
.
Enter
555-233-118