Avaya CMC1 Installation, Upgrades And Additions page 63

Set Up System Access
1. Connect the equipment as shown in
1
2
1
2
Figure Notes
1. Avaya CMC1 Media Gateway
2. Digital line circuit pack
3. B25A 25-pair cable
4. Main distribution frame (MDF)
5. 103A or modular wall jack
6. 400B2 adapter
7. D6AP power cord (8400B+ only)
Figure 1-27. A typical remote connection using an 8400B (top) or 7400B
NOTE:
With a 7400A or 7400B+ data module, use a 4-wire digital line circuit pack.
With the 8400B+ data module, use a 2-wire digital line circuit pack.
In place of a 7400B+ data module, you can use a 7400A data module. If you
do, set the 7400A to DCE Mode.
2. Wire the digital line circuit pack to the wall jack as follows:
555-233-118
4
3
4
3
(bottom) data module
For a 7400B+, wire to the second and third pair of the wall jack.
For an 8400B+, wire to the first pair of the wall jack.
Figure 1-27.
8
10
5
7
6
9
10
5
9
8
8. Data module power supply
9. 7-ft (2-m) D8W modular cord
10. Data module (8400B+ [top] or
7400B+ [bottom])
11. 50-ft (15-m) M25A cable (RS-232)
12. Computer with Avaya Site
Administration
Issue 5 October 2002
12
11
12
11
cydfdr08 LJK 101701
1-49