Avaya CMC1 Installation, Upgrades And Additions page 253

Add IP Solutions
NOTE:
The P board suffix designation means the circuit pack is
firmware-downloadable. Refer to
Packs'' on page 5-2
For information on installing this IP Solution, refer to
Add IP Media Processor
Add IP Interface Assembly
Add IP Media Processor
Unlike the TN802B IP Interface Assembly, the TN2302AP operates in one mode:
Media Processor (MedPro), which is H.323 compatible.
The following sections describe the process for
Preparing for Installation and Upgrade
Installing the TN2302AP IP Media Processor
Upgrading TN802 IP Trunking to TN2302AP IP Media Processor
Upgrading a TN802B IP Interface Assembly to TN2302AP IP Media
Processor
For administration, refer to the Administration for Network Connectivity for Avaya
MultiVantage Software.
Preparing for Installation and Upgrade
In addition to the TN2302AP IP Media Processor, you must also install and
administer a C-LAN circuit pack (TN799B/C). For C-LAN administration, refer to
Administration for Network Connectivity for Avaya MultiVantage Software.
NOTE:
Although the TN2302AP IP Media Processor works with the TN799B C-LAN
circuit pack, you need a TN799C to download new firmware to the
TN2302AP circuit pack.
The TN2302AP IP Media Processor can work in the same configuration with the
TN802 IP Trunking and the TN802B IP Interface Assembly. When figuring the
maximum number of circuit packs, you must include all in your total count.
NOTE:
The TN802 IP Trunking cannot talk directly via Ethernet to the TN2302AP IP
Media Processor.
Each TN2302AP can support between 32 and 64 voice channels, depending on
the codecs used.
555-233-118
''Downloading Firmware to Port Circuit
for more information.
Issue 5 October 2002
5-51