Disable Tti; Check Tti Status; Save Translations; Save Announcements (If Necessary) - Avaya CMC1 Installation, Upgrades And Additions

Task table
4. If any of the links are not up, take the necessary corrective action to restore
the link before continuing with the upgrade.

Disable TTI

1. Type change system-parameters features and press
2. Go to the second page and set the Terminal Translation
Initialization (TTI) Enabled? field to n and press
de-activate the TTI feature. If the field is already n, cancel the command.
!
CAUTION:
If you do not disable the TTI feature, the translations can be corrupted.

Check TTI status

1. Type status tti and press
2. Repeat the command until the TTI Background Task State is
completed.

Save translations

1. Type save translation and press
memory to the translation flashcard (about 10 minutes).
2. Ensure that the save translation command was successful (error code
must be zero). If the value is anything else, the translations were not
copied to the flashcard. If the translations are corrupted, the following error
message appears when logging in:
!

Save announcements (if necessary)

NOTE:
The TN750C and the TN2501AP Integrated Announcement circuit packs
store announcements in nonvolatile memory; saving the announcements to
a flashcard is optional.
1. If the PPN contains a TN750/B Announcement circuit pack, type display
announcements and press
555-233-118
Enter
WARNING:
Translation corruption detected; call an Avaya distributor immediately.
NOTE:
The save translation command does not run if the translations are
corrupt or do not match (duplicated systems only).
.
to write all translations from
RETURN
.
RETURN
Issue 5 October 2002
RETURN.
to
RETURN
4-15