Avaya CMC1 Installation, Upgrades And Additions page 73

Activate and Administer the System
Set Country Options
Some country options need to be set to turn off the red alarm LEDs.
1. Enter change system-parameters country options and press
screen similar to
the Companding Mode field.
change system-parameters country-options
Analog Ringing Cadence: 1
Analog Line Transmission: 1
Display Character Set: Roman
Howler Tone After Busy? n
TONE DETECTION PARAMETERS
Screen 1-1. Typical System Parameters Country-Options Screen
2. The default (United States) companding mode is mu-Law. If the country
uses A-Law companding, type A-Law. Press
3. Set the country codes as needed in the following fields. Refer to
on page 1-60
shown in the example above.
555-233-118
Screen 1-1
SYSTEM PARAMETERS COUNTRY-OPTIONS
Companding Mode: Mu-Law
440Hz PBX-dial Tone? n
Tone Detection Mode: 6
Interdigit Pause: short
NOTE:
Other items eventually need to be entered on this screen, but this is
all that is needed to turn the red alarm LEDs off.
for the country codes. The United States country code (1) is
Digital Loss Plan
Analog Ringing Cadence
Analog Line Transmission
displays on the terminal. The cursor is set on
Base Tone Generator Set: 1
440Hz Secondary-dial Tone? n
Set Layer 1 timer T1 to 30 seconds? n
Disconnect on No Answer by Call Type? n
when finished.
Enter
Issue 5 October 2002
A
Enter.
Page 1 of 23
Table 1-9
1-59