Avaya CMC1 Installation, Upgrades And Additions page 227

Installing TN464GP/TN2464BP with Echo Cancellation
For information on installing port circuit packs, refer to
page 5-1. For information on setting the option switches, refer to
TN2464BP Option Settings'' on page
circuit packs, refer to the Administrator's Guide for Avaya MultiVantage Software.
Echo cancellation must first be purchased, then a License File created and
installed.
Use the following procedure to modify the settings:
NOTE:
You do not need to busyout the circuit packs to modify the settings. But the
modified settings do not take effect until either the port is busied out or the
scheduled maintenance runs.
1. Type display system-parameters customer-options and press
Verify that the DS1 Echo Cancellation? field is set to y. If not, you
must obtain a License File with this feature enabled and install it.
2. Type [add | change] trunk-group [next | number] and press
add trunk-group next
Suppress # Outpulsing? n
Seize When Maintenance Busy: neither-end
Incoming Tone (DTMF) ANI: no
Connected to CO? n
3. On Trunk Features, screen 2, set the DS1 Echo Cancellation? field to
y.
4. Type [add | change] ds1 UUCSS and press
555-233-118
TRUNK FEATURES
ACA Assignment? n
Internal Alert? n
Data Restriction? n
Glare Handling: none
Used for DCS? n
''Add Circuit Packs'' on
2-11. For information on administering the
Page
Measured: both
Maintenance Tests? y
Per Call CPN Blocking Code:
Per Call CPN Unblocking Code:
Ds1 Echo Cancellation? y
.
Enter
Issue 5 October 2002
''TN464F/GP and
.
Enter
.
Enter
2 of 11 SPE A
5-25