Verify The Upgrade; Check Link Status - Avaya CMC1 Installation, Upgrades And Additions

Task table

Verify the upgrade

1. Type status system 1 and verify that the system is in a normal state.
Check these fields for the corresponding values:
2. Type display alarms and press
If there are alarms, take the necessary corrective actions.
3. Type list configuration software-version and press
The Software Versions screen appears.
4. In the UPDATE FILE section, check the Update State field for a software
patch:
5. In the SOFTWARE VERSION section note the current version listed in the
Memory Resident field.

Check link status

1. Type display communication-links and press
Ensure that the link administration is the same as before the upgrade.
2. Type status link number and press
Check these fields for the corresponding values:
If any of the links are not up, take the necessary corrective action to restore
the link
3. Type list signaling-group press
Check the system to ensure that the signaling group administration is the
same as before the upgrade.
555-233-118
In the SPE ALARMS section, MAJOR and MINOR alarms = 0
Service State = in service
If there is a patch number, then a patch has been applied.
If the field is none in memory, there is no software patch in
system memory.
NOTE:
If you need to restore the system to the old version, you must also
download a patch onto the system.
Link Status = connected
Service State = in service
.
RETURN
RETURN
RETURN
for each administered link.
RETURN
.
RETURN
Issue 5 October 2002
.
.
4-19