Avaya CMC1 Installation, Upgrades And Additions page 49

Install Main Distribution Frame (MDF) and External
Modem
Install the External Modem
The U.S. Robotics Sportster Model USR 33.6 EXT external modem is the
recommended external modem. Avaya CMC1 Media Gateways operate with this
modem set to the factory default settings.
NOTE:
You may use a locally obtained, type-approved external modem (33.6 kbps
and V.34 protocol). Contact your Avaya Inc. representative for more
information.
1. Use installer-provided hardware to mount the modem. See
page
external modem to the plywood in a location which allows the standard
connection to the interconnect cable.
2. Route the MODEM cable (P2) from the Processor Interface Cable through
the cable trough and to the modem.
3. Connect the cable to the modem. Refer to
Pinout'' on page 2-15
4. Plug the modem power cord into an electrical outlet and turn on the
modem.
5. Modem setup and administration is performed in
Settings'' on page
555-233-118
1-31. If top-mounting MDFs or dual-mounting MDFs, mount the
for the pinout of the modem cable.
1-107.
Figure 1-16 on
''Processor Interface Cable
''External Modem Option
Issue 5 October 2002
1-35