Avaya CMC1 Installation, Upgrades And Additions page 237

Add Integrated Announcements/TN2501AP
Hardware specifications
The following table contains a list of the required VAL hardware.
Part
TN2501AP
Backplane Adapter
LAN cable
Notes for
To establish LAN connections the TN2501AP circuit pack requires a
Backplane Adapter
the cabinet, corresponding to the TN2501AP integrated announcement
circuit pack slot.
LAN cable
Backplane Adapter
Figure 5-3 shows the Backplane Adapter.
Figure Notes
1. Amphenol connector
attaches to the back of the
switch cabinet,
corresponding to the
TN2501AP circuit pack slot.
Figure 5-3. Backplane Adapter (Comcode 848525887)
555-233-118
varies by network (see also
Figure 5-3)
that attaches to the Amphenol connector on the back of
that attaches to the Backplane Adapter.
3
1
addfipm2 KLC 083000
Number Comcode
1 108772583
1 848525887
N/A N/A
2
2. RJ-45 LAN cable connection
10 Mbps uses Category 3 cable.
100 Mbps uses Category 5 cable.
3. This connector is not used for VAL.
Issue 5 October 2002
5-35