Avaya CMC1 Installation, Upgrades And Additions page 83

Install and Wire Telephones and Other Equipment
Analog Station or 2-Wire Digital Station Example
This example is typical of the 2-wire digital stations,2-wire analog stations, analog
CO trunks, DID trunks, and external alarms. See
Figure Notes
1. 2500-type analog station
Figure 1-32. 2500-Type Analog Telephone Wiring
1. Choose a peripheral to connect (such as a 2-wire digital station).
2. Choose the port circuit pack to use and its carrier and slot number. For
example, TN2183 Analog Line, Cabinet 1, Carrier C, Slot 1.
3. Choose a port circuit on the port circuit pack, for example port 3.
4. Install cross-connect jumpers to connect the pins from the 2-wire station to
the appropriate pins on the port circuit pack.
5. Administer using Administrator's Guide for Avaya MultiVantage Software.
Analog Tie Trunk Example
Figure Notes
1. External trunk or adapter
Figure 1-33. Analog Tie Trunk Wiring
555-233-118
T 2
3
R
2. 2-wire analog line circuit pack
T1 26
1
R1
T11 27
R11 2
E1 28
M1
3
2. Tie trunk circuit pack
Figure 1-32.
28 T3
03 R3
2500wire RBP 040596
29 T2
4 R2
30 T12
R12
5
31 E2
6 M2
tie_wire RBP 040596
Issue 5 October 2002
1-69