To Configure The Tape Drive - Avaya CallPilot 1002rp Maintenance And Diagnostics

Figure 28: Cabling example

To configure the tape drive

Note:
Some settings may already be properly configured. If it is not clear from the drive
manufacturer's documentation how to set jumpers, contact your Avaya technical support
representative.
1. Set the SCSI ID to 6.
2. Disable the Active Terminators (Term Enable).
3. Enable Parity Checking.
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Note:
Termination is provided by an active SCSI terminator that you connect to the end
of the SCSI cable (see Figure 28: Cabling example
To configure the tape drive
on page 107).
December 2010 107