Table of Contents
Advertisement
Chapter 12: Replacing or adding voice
In this chapter
DSP numbering and location
Replacing an MPB96 board
DSP numbering and location
DSPs are the built-in voice processing components on MPB boards. DSPs are numbered to
distinguish them in Avaya CallPilot® maintenance programs, such as the Maintenance page
in Avaya CallPilot Manager. Each DSP supports up to eight multimedia channels.
DSP numbering on MPB96 boards
The MPB96 board has 12 embedded DSPs. MPC-8 boards are not required. If an embedded
DSP is faulty, you must replace the entire MPB96 board.
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
processing boards
on page 125
on page 126
December 2010
125
Advertisement
Table of Contents
