Nbtstat Command Syntax; Nbstat Command Parameters - Avaya CallPilot 1002rp Maintenance And Diagnostics

Nbtstat command syntax

The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n] [-R] [-r] [-S] [-s]
[interval]

nbstat command parameters

Table 7: nbstat command parameters
Parameter
-a remotename
-A IP address
-c
-n
-R
-r
-S
-s
interval
To run the nbtstat command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Lists the remote computer name table using its name.
Lists the remote computer name table using its IP address.
Lists the contents of the NetBIOS name cache giving the IP
address of each name.
Lists local NetBIOS names. Registered indicates that the name
is registered by broadcast (Bnode) or WINS (other node types).
Reloads the LMHOSTS file after purging all names from the
NetBIOS name cache.
Lists name resolution statistics for Windows networking name
resolution. On a Windows computer configured to use WINS,
this option returns the number of names resolved and registered
through broadcast or through WINS.
Displays both client and server sessions, listing the remote
hosts by IP address only.
Displays both client and server sessions and attempts to
convert the remote host IP address to a name using the HOSTS
file.
Displays selected statistics, pausing interval seconds between
each display. Press Ctrl+C to stop displaying statistics. Without
this parameter, nbtstat prints the current configuration
information once.
Nbtstat command syntax
Description
December 2010 35