Requirements - Avaya CallPilot 1002rp Maintenance And Diagnostics

Caution:
Risk of equipment damage
Take precautions to protect computer boards. ESD can damage boards and make them
unusable. Wear an ESD wrist strap.

Requirements

Before replacing the alarm board or panel display, gather the following tools:
• a Phillips screwdriver
• an antistatic wrist strap
• the replacement components
To replace the alarm board
1. Power off the server.
2. Loosen the two thumbscrews securing the faceplate to the left of the 1002rp server
Figure 19: Alarm board carrier
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
power supply modules (see A in
If needed, use a flat-blade screwdriver. The thumbscrew must rotate freely and not
contact the chassis threads.
Figure 19: Alarm board carrier
Requirements
on page 91).
December 2010 91