Replacing media drives
Figure 23: Remove SCSI carrier from chassis
5. Remove the faulty drive by loosening the four Phillips-head screws that secure it to
6. Attach the new drive to the carrier by four Phillips-head screws.
7. Align the carrier with the drive frame and slide it into the chassis.
8. Fasten the two thumbscrews.
9. Close the front bezel and lock it.
About the media drive bay
Media drive bays contain media devices, including CD-ROM, tape, and floppy drives. If your
media drives become damaged or you want to upgrade, you can replace these drives. This
section provides procedures for replacing or upgrading any device in the media drive bay.
100
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
the carrier.
Note:
Expect resistance as the carrier and backplane connectors meet.
December 2010