Requirements; Sbc Card Connectors And Jumpers - Avaya CallPilot 1002rp Maintenance And Diagnostics

Requirements

Before you replace the SBC card, gather the following tools:
• one Phillips-head screwdriver
• one antistatic wrist strap
• the replacement SBC card
• cable labels

SBC card connectors and jumpers

Figure 38: SBC card connectors and jumpers.
where cables must be disconnected or connected as part of the procedure to replace the SBC
card. The jumpers shown in this diagram are used in the BIOS configuration procedures
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
on page 140 shows the location of connectors
Requirements
December 2010 139