Table of Contents
Advertisement
Chapter 13: Replacing the D/480JCT-2T1 T1
In this chapter
TD/480JCT-2T1 card function
Replacing the D/480JCT-2T1 card
TD/480JCT-2T1 card function
A selection of one to four D/480JCT-2T1 T1 interface cards can be configured to match the
number of voice channels connecting to the switch. Each T1 interface card occupies one PCI
slot.
The Intel D/480JCT-2T1 card carries the media stream and call control signals between Avaya
CallPilot and SL-100* or DMS-100. The card connects to the MPB96 board with a CTbus cable.
Replacing the D/480JCT-2T1 card
If you determine that a problem exists with your card, replace it. You must identify the type of
card before you can decide where to install it.
Requirements
To replace the card, you require the following:
• one Phillips screwdriver
• one antistatic wrist strap
• the replacement card
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
interface card
on page 131
on page 131
December 2010
131
Advertisement
Table of Contents
