Avaya CallPilot 1002rp Maintenance And Diagnostics page 115

To perform a consistency check
1. Restart the CallPilot system and press Ctrl+M when prompted, to enter the RAID
2. From the Management Console, select Check Consistency.
3. Use the arrow key to highlight the first drive to be checked.
4. Press the space key to select the drive.
5. Press F10 to check consistency.
6. Click Ok.
7. Repeat steps 3 to 6 for each drive until all three drives have been checked for
To split the RAID
1.
2. From the Management menu select Objects > Physical Drive.
3. Select the A01- 2 drive using the cursor and press Enter.
4. Select Fail Drive.
5. Repeat this process for the remaining two drives present on Channel 2.
6. Press Esc three times to exit the Ctrl+M utility.
7. Reboot.
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
setup utility during bootup.
Result: The Logical Drives Configured dialog box displays.
Result: The "Do you wish to continue?" dialog box appears.
Result: The consistency check begins and a status dialog box appears.
consistency.
Important:
To split the RAIDBecause the 1002rp has three physical drives, the RAID splitting
must be done at the Ctrl+M utility level. Do not perform this procedure using the
Windows MegaRAID console. There is a risk of database corruption.
Restart the CallPilot system and press Ctrl+M when prompted, to enter the RAID
setup utility during bootup.
Result: A list of all drives organized per channel appears.
Result: A warning message box appears. Ignore it and select Yes. The drive status
changes to FAILED. The alarm should start beeping.
Result: The system reports that three drives are in critical mode and starts beeping.
This is OK; the system will still reboot.
Important:
The alarm can be silenced, but under no circumstances should it be disabled. On
the toolbar, select Objects → Adapter → Alarm Console → Silence Alarm from
the toolbar.
Verifying consistency on the drives
December 2010 115