Requirements For Upgrading Or Reconfiguring The Bios; To Upgrade The Bios - Avaya CallPilot 1002rp Maintenance And Diagnostics

Maintaining the Pentium III SBC card

Requirements for upgrading or reconfiguring the BIOS

CallPilot Image CD (1and 2)

To upgrade the BIOS

You must perform both of the following procedures to upgrade the BIOS:
1. Upgrade the BIOS (To upgrade the BIOS).
2. Configure the SBC
1.
2. Power on the CallPilot server.
3. Insert the CallPilot Image CD 1 of 2 for the platform into the CD-ROM drive.
4. Set the CallPilot server BIOS to boot from the CD-ROM.
5. Press 2 to select Utilities (BIOS, Firmware, etc...), and then press Enter.
6. Press 1 to select Update 1002rp BIOS to version NNCXUA07 and then press Enter.
7. Choose yes (Y) to confirm.
8. Type n and then press Enter.
9. Type nncxau07.rom and then press Enter.
10. Type y and then press Enter.
142 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
(To configure the Pentium III SBC
Caution:
Risk of data loss
Perform this procedure only if specifically instructed to do so by your Avaya
representative.
Disconnect the cable that connects the CallPilot server to the Avaya server subnet.
Result: The server boots from the CD-ROM and displays the installation menu.
Result: The system prompts you to confirm that the single board computer (SBC)
is a SLE model.
Result: The system prompts you to save the existing BIOS.
Result: The system prompts you to enter the file name.
Result: The system prompts you to program the boot block.
Result: The system updates the BIOS and then prompts you to reboot the server.
on page 143).
December 2010