Table of Contents
Advertisement
Using serial port diagnostic tools
Conducting TSTSERIO tests
The TSTSERIO command performs local loopback tests of the serial communication ports
from the server run-time environment.
Note:
Before conducting these tests, shut down the appropriate services. See
services
Caution:
Risk of communications loss
By stopping the services on COM1 or COM2, you lose the support access feature.
Caution:
Risk of stopping call processing
By stopping the services on COM2, you stop call processing on CallPilot.
TSTSERIO command syntax
The syntax for the TSTSERIO command is as follows:
TSTSERIO [/?] /P:comport [/S:subtstname] [/L:loops]
TSTSERIO command parameters
Table 10: TSTSERIO command parameters
?
/P:comport
/S:subtstname
42
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
on page 39.
Flag
n/a
Required
Optional
Requirement
Displays Help.
Specifies the symbolic port
name assigned to the port you
want to test.
Specifies a TSTSERIO
subtest. See the following
Shutting down
Description
December 2010
Advertisement
Table of Contents
