Tstserio External Loopback Plug Subtests; Conducting Tstserio Tests With The Loopback Plug - Avaya CallPilot 1002rp Maintenance And Diagnostics

Using serial port diagnostic tools

TSTSERIO external loopback plug subtests

The following external loopback subtests are available for the TSTSERIO command. For each
of these tests, an external loopback connector must be used. For more information, see

Conducting TSTSERIO tests with the loopback plug

Table 12: TSTSERIO external loopback plug subtests.
Subtest name
edata
emsr
eint
To invoke the TSTSERIO /S command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type tstserio with the required parameters, and then press
3. Type Exit, and then press Enter to exit the Command Prompt window.
Conducting TSTSERIO tests with the loopback plug
The TSTSERIO command requires an external loopback connector plug for its edata, emsr,
and eint subtests.
44 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
External data bus loopback. This test requires an external loopback
connector.
External modem status register. This test requires an external loopback
connector.
Test ability of device to generate interrupts. This test requires an external
loopback connector.
Result:The Command Prompt window appears.
Enter.
For example, type TSTSERIO /P com1 /S extr, and then press Enter.
on page 44
Description
December 2010