The Netstat Command; Netstat Command Syntax; Netstat Command Parameters - Avaya CallPilot 1002rp Maintenance And Diagnostics

Using Windows online diagnostic tools
2. At the Command prompt, type nbtstat with the required parameters.
3. Press Enter.
4. Type Exit to exit the Command Prompt window and return to Windows.

The netstat command

The netstat command displays current TCP/IP network connections and protocol statistics.

Netstat command syntax

The netstat command uses the following syntax:
netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]

netstat command parameters

Table 8: netstat command parameters
Parameter
-a
-e
-n
-s
-p proto
-r
interval
To run the netstat command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
36 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Result: The Command Prompt window appears.
Result: The system runs the nbtstat utility.
Displays all connections and listening ports.
Displays Ethernet statistics. This can be combined with the -s option.
Displays addresses and port numbers in numeric form.
Displays statistics for each protocol.
Shows connections for the protocol specified by proto. Proto can be tcp
or udp. If used with the -s option, proto can be tcp, udp, or ip.
Displays the contents of the routing table.
Redisplays selected statistics, pausing between each display. Press Ctrl
+C to stop redisplaying.
Description
December 2010