Avaya CallPilot 1002rp Maintenance And Diagnostics page 86

Replacing basic chassis components
Figure 15: SCSI power cable attached to T board
14. Replace the original SCSI power cable with the new cable. Securely attach it to both
15. Reinstall the SCSI drive cage into the bay and screw it into place. Torque the screws
16. Affix a revised product label above the existing labels on the left rear of the chassis.
Figure 16: Product label location on chassis
17. Replace the bezel cover on the front of the chassis.
86 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Note:
Leave all other cable assemblies connected. Do not damage or disconnect other
components on the SCA backplane.
the SCA backplane and the T board inside the chassis.
at 6 to 8 inch lbs.
December 2010