Avaya CallPilot 1002rp Maintenance And Diagnostics page 129

5. Go to Start → Programs → Administrative Tools → Services. Select Resource
6. Run configuration wizard and setup the new DSPs. Add or change at least one DSO
7. Finish Configuration wizard and reboot the Callpilot.
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Adding an MPB16/MPB96 board or replacing MPB16 with MPB96 in a 1002rp
A notification pops up "New hardware is ready to use."
• Reboot for CallPilot to recognize the hardware.
Package 2 and set it to automatic if the boards are added.
port under switch configuration.
December 2010 129