Table of Contents
Advertisement
Configuring MPB96 boards
Figure 30: D/480JCT-2T1 PCI T1 board
Installing valid configurations
Important:
You must use one of the valid configurations and respect the slot map or the system behavior
will be erratic.
T1 switch connectivity
To configure one MPB96 and two T1 PCI cards
1. Plug the MPB96 card in PCI slot 3.
2. On the first Intel D/480JCT-2T1 PCI card:
3. Plug the first Intel D/480JCT-2T1 PCI card 1 in PCI slot 4.
4. On the second Intel D/480JCT-2T1 PCI card:
122
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
a. Set the card SW100 ID rotary dial switch to 0.
b. Ensure that there are no termination jumpers installed on P700.
a. Set the card SW100 ID rotary dial switch to 1.
December 2010
Advertisement
Table of Contents
