Agilent Technologies 1290 Infinity User Manual page 97

Loading the LC Injector HTC/HTS DLW Object
If the revision level of the PAL Object Manager List installed on the computer
is PAL-xt Object Lists Rev. A, copy the provided folder "Wash Station Option"
(See
has been installed with the Object Manager. This software is usually installed
in the following path:
C:\Program Files\PAL\Object Manager\Object Lists
Using a PAL-xt Object List Rev. A or higher, the object DLW Option will become
a part of the list in the folder Wash Stations. The following Object List is then
available:
PAL DLW: DLW Option Firmware Object List
The instructions in the following section have to be followed for upgrades only. All Agilent
N O T E
1290 Infinity LC Injector HTC/HTS are configured with the right objetcs from the factory.
1 Open the Object Manager and verify the revision level of the Object Lists.
2 Select the PAL DLW Object list and click Send selected Object Lists to PAL.
3 Close the Object Manager.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
Figure 48 on page 98.) from the CD-ROM to the Object Lists folder which
If PAL-xt Object Lists Revision level A is available, continue as described
below.
If a revision level PAL Object Lists is used, copy the provided DLW Object List
into the Object Manager folder as described above.
LC Injector HTC/HTS Description and Installation
3
Object Positions
97