Agilent Technologies 1290 Infinity User Manual page 169

Injection Valve / Valve Rotor
1 After the mechanical connection of the PAL Valve Drive to the X-axis and
2 Insert the valve body into the shaft until the pin engages in the shaft.
3 Center the valve body by turning the valve body into position until the
4 Insert the Valve Body completely into the shaft until the pin on top of the
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
electrical connection to AUX1 at the board, turn on the power of the PAL
System.
The Firmware Object for the Valve type PAL VlvDrv-5067-4123_1 is preloaded,
the Valve Drive will go into the Standby position.
vertical port is aligned.
valve engages in the threaded Valve Drive Bracket. Tighten the Valve Body
with the polymer connecting nut.
Figure 77 Valve Installation
LC Injector HTC/HTS Description and Installation
3
Replacing Parts
169