Agilent Technologies 1290 Infinity User Manual page 57

3
LC Injector HTC/HTS Description and Installation
Installation
4 Place one of the screws onto the end of the supplied Torx driver. Slide the
clear plastic cover on the Injection Unit all the way to the top. Locate the
three large holes in the black anodized frame attached to the Z-axis inside
the Injection Unit. Slide the frame upwards until the top hole is centered on
the top threaded hole at the end of the Y-axis. Insert and securely tighten
the Torx screw A (see Figure 13 on page 57).
Figure 13 Inserting the Injection Unit Mounting Torx Screws
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual 57