Agilent Technologies 1290 Infinity User Manual page 117

3
LC Injector HTC/HTS Description and Installation
Interfacing the LC Injector HTC/HTS to other Devices
If an item of the class Sync Signal is assigned to an output signal, such as
TTL-In1, then this TTL contact must be defined as either Active High or Active
Low, as expected by the HPLC system. This is defined in the Firmware class
Events.
Select the corresponding item and set the mode accordingly.
The setting is provided with the schematic description of the LC Sync Cable if
a dedicated cable is ordered.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual 117